Flash procedures:

1. Make a bootable clean floppy without config.sy and autoexec.bat file.
   You can do this through "format a: /s" to a blank disk or make the disk
   bootable by "sys a:" command.


2. Unzip the BIOS file to a floppy disk. Then boot up from the floppy without
   loading any device driver.


3. To program the Award BIOS, run Awdflash.exe. Never program the BIOS under
   Windows environment!


4. Type in the file name that you wish to program also backup your original
   BIOS.

Tyan Computer is not responsible for any damage to the flash chip during the 
flash procedures.






